Finned Roller – Barrel
The barrel finned roller complements the straight finned roller for curved and contoured areas within the laminate layup.
The barrel shape avoids localized pressure points, ensuring reliable de-airing even in complex geometries.
- Pure plug system instead of screwing – only the roller is replaced when worn
- Rollers made of POM – robust, wear-resistant and chemical-resistant
- Barrel form – specifically for curved areas
- Complements the straight finned roller
- Avoids localized pressure points
| Item No. | Size | PU | Roller Material | D1 | L1 | R |
|---|---|---|---|---|---|---|
| ER-18-75-B500-01 | 18 x 75 mm barrel | Individually/Piece by piece | POM | 18 mm | 75 mm | 500 mm |
Advantages
- Pure plug system – the roller is plugged on, not screwed
- Barrel form conforms to curved and contoured surfaces
- Refill packs with replacement rollers available
Plug System Instead of Screwing
As with the Finned Roller – Straight, the roller is simply pushed onto the handle rather than screwed into place. When it wears out, only the roller needs to be replaced. Compatible replacement rollers are available in refill bags, saving costs and reducing plastic waste.
Replacing the roller
- Hold the roller firmly with your fingers or the palm of your hand.
- Pull the roller off the handle.
- Slide the new replacement roller onto the handle until it is fully seated.
Application
The barrel finned roller is used when laminating GRP and CRP components with curved or contoured surfaces, where
the straight finned roller reaches its limits.
Materials
The roller is made of robust, wear-resistant POM. The frame is galvanized and fitted with a PP handle.
Which Roller Size Fits?
The right roller and frame length depends on the size of the laminate surface being worked on. See the table for the
available versions.
Custom Solutions
Custom roller and frame lengths available on request.
