Tee Hose Connector
The tee hose connector joins three hose lines in a T-shape, enabling flexible branching within an infusion or vacuum setup.
Its robust construction ensures a tight, reliable con- nection even with frequent assembly and disassembly.
- T-shaped branch for three hose lines
- Material: POM – chemical-resistant, dimensionally stable
- Media: epoxy and polyester resin
- Temperature: -40 °C to +90 °C, briefly +110 °C*
| Item No. | ⌀-Hose | PU | Material | D1/D2 | L1 |
|---|---|---|---|---|---|
| SV-06T -100 | 6mm | 100 | POM | 6 mm | 50 mm |
| SV-08T-100 | 8 mm | 100 | POM | 8 mm | 55 mm |
| SV-10T-100 | 10 mm | 100 | POM | 10 mm | 65 mm |
| SV-12T-100 | 12 mm | 100 | POM | 12 mm | 65 mm |
| SV-16T-50 (soon) | 16 mm | 50 | POM | - | - |
| SV-20T-50 (soon) | 20 mm | 50 | POM | - | - |
Advantages
- Flexible T-branch for complex hose routing
- Robust, tight connection even with frequent assembly and disassembly
- Suitable for GRP, CRP and other fibre-reinforced composites
Application
The tee hose connector is used when a hose line needs to branch into two further lines, for example to split a resin flow
across several feed points.
Depending on the setup, several tee hose connectors are combined to build complex line networks within the infusion
setup.
Materials
The tee hose connector is designed for use with epoxy and polyester resin. The POM used is
chemical-resistant and dimensionally stable.
Which Diameter Matters?
The inside diameter of the hoses to be connected is decisive for choosing the right version. See the table for the available
sizes.
Custom Solutions
Custom hose sizes and special versions available on request.
* The temperature resistance depends on the specific application and medium. The customer is responsible for verifying the suitability of the product under their individual operating conditions.
